Clinching fasteners are mechanical fasteners with self clinching nuts. Mainly used for joining thin plates and plates. It consists of two parts, one is the anchor and the other is the rivet sleeve. The working principle of pressure riveting fasteners is to use anchors to fix the two sheets or plates of the joint together, then press the rivet sleeve on the anchor, and fix the rivet in the rivet sleeve to the anchor by heat treatment or mechanical extrusion on, forming a fastener. It can fix the joint between the thin plate and the thick plate, and at the same time ensure that the joint surface is flat, beautiful and tight.
Pressure riveting fasteners have the following characteristics:
1. High strength: Anchors and rivet sleeves have sufficient strength to ensure the strength and stability of fasteners.
2. Corrosion resistance: anchors and rivet sets are usually made of stainless steel, so they have strong corrosion resistance and can be used in different environments.
3. Convenient and fast: The installation speed of the pressure riveting fastener is very fast, and it only needs to use special tools to complete it.
4. Beautiful and tidy: Since the connection method of the pressure riveting fastener is through the internal connection of the plate, its appearance is very beautiful and tidy, which will not affect the aesthetics of the mechanical appearance.
Pressure riveting fasteners are widely used in industry, aerospace, automotive and other fiel